01 jun 2026
Cuando los plazos son la prioridad del cliente
Perspectivas
-
En algunos proyectos, el principal desafío no es la complejidad técnica, sino los plazos. Cuando los plazos se vuelven críticos, los equipos de ingeniería deben cambiar su enfoque: anticipar decisiones, aceptar la incertidumbre y apoyarse en un desempeño compartido. En este contexto, la ingeniería pasa a ser un proceso de toma de decisiones, equilibrio entre compromisos y gestión de riesgos, tanto técnicos como humanos. A continuación, Hugo Careau, P.Eng., Descarbonización, y Ulric Chayer, P.Eng., gerente de departamento, ingeniería mecánica, abordan tres preguntas clave.
-
05 ago 2019Energía Eléctrica y RenovablesDo you need advanced control?
-
Michel Ruel, P.Eng.
Expert, Process Control
-
-
22 jul 2019Minería y metalurgiaSlurry engineering: what to consider
-
Roman Dorfman, P.Eng.
Principal Engineer, Piping
-
-
05 jul 2019Energía Eléctrica y RenovablesPromoting environmental and social compliance of your projects
-
Vincent Clément, P.Biol., RP.Bio., QAES
Profesional Senior de Medio Ambiente
-
-
03 jul 2019Energía Eléctrica y RenovablesDigital Power Systems and Grid Modernization
-
-
02 jul 2019Minería y metalurgiaOre loading pockets are used at strip mining operation sites. They generally comprise a dumping station, the top of which is equipped with a protective bumper, a dumping tunnel dug into the rock itself, and an apron pan feeder installed at the bottom of the tunnel. Trucks unload the crude ore into the pit, which feeds the material into an apron pan feeder at the bottom of the loading pocket. This controls the flow of ore and transfers it into train cars that transport the raw material to the crusher, by train or an equivalent means of transportation, which may collect the ore from multiple loading pockets.Structural expertise in ore loading pockets -
-
27 jun 2019Energía y químicosProven methods for reducing sulfur dioxide (SO2) emissions
-
Joe Nava, Ing.
Director global, combustibles y productos químicos avanzados
-
-
14 jun 2019Energía Eléctrica y RenovablesIntegrating digital technology: Ready, set, go!
-
Marc-André Perron, P.Eng.
Director, Management - Digital Power Systems
-
-
13 jun 2019Energía Eléctrica y RenovablesNERC regulatory compliance program: where to start
-
Eric Breault, P.Eng.
Senior Engineer, Electrical - Power Systems, Protection and Control
-
-
11 jun 2019Energía Eléctrica y RenovablesEngineers’ responsibilities: Which version of the National Building Code should be used?
-
Bertrand Comeau, P.Eng.
Principal Engineer, Structural
-
-
05 jun 2019Otras IndustriasAt BBA, we sometimes work on systems that operate erratically and, as a result, don’t offer the expected performance. Low throughput, frequent shutdowns, premature failure, high electrical or raw materials consumption: the issues can vary. When discussions ensue, the system’s supplier is often blamed for not meeting the request. But the question that must be asked is: was the request clear? Were the design criteria properly defined to ensure the system would be optimally integrated? In short, did the supplier have everything required to properly meet the client’s needs?Successfully integrate your new systems!
-
Mario Côté, P.Eng.
Senior Engineer, Automation
-
-
23 may 2019Energía Eléctrica y RenovablesIEEE 1584-2018 guide for performing arc-flash hazard calculations: comparative analysis with IEEE 1584-2002
-
Joel Sourceaux, P.Eng.
Principal Engineer, Electrical - Power Systems, Protection and Control
-
-
17 may 2019Energía Eléctrica y RenovablesMake your operational data talk
-
-
17 may 2019Energía Eléctrica y RenovablesThe cyber risks of introducing new technologies into your operations
-
José Alvarado, P.Eng., GICSP
Director, ICS Cybersecurity
-
-
16 may 2019Energía Eléctrica y RenovablesHydraulic simulation with 3D computational fluid dynamic modelling in a flood event
-
Glen Ichikawa, P.Eng.
Senior Engineer - Hydropower
-
-
15 may 2019Energía Eléctrica y RenovablesCut your commissioning time with process control
-
Marc Tardif, Technologist.
Senior Advisor, Operations - Salt Lake City office
-
-
25 abr 2019Energía Eléctrica y RenovablesControl risks of explosion in your plant
-
Hugues Châteauneuf, P.Eng.
Senior Consulting Expert, Ventilation, Hazardous Locations, Explosion Hazards
-
-
22 abr 2019Minería y metalurgiaWhat to do during an inspection by the Ministère de l'environnement
-
David Giard, P.Eng., M.Sc.
Senior Engineer, Environmental Engineering
-
-
19 abr 2019Energía Eléctrica y RenovablesCorona: a problem you should not ignore
-
Samuel Gendron, P.Eng.
Senior Engineer, Field Services
-
-
11 abr 2019Energía Eléctrica y RenovablesManaging power system harmonics for underground mines
-
Stéphan Landry, P.Eng.
Principal Engineer, Electrical - Power Generation and Apparatus
-
-
08 abr 2019Energía Eléctrica y RenovablesIn Canada, as in other northern countries, both industrial and infrastructure projects must often be carried out in harsh winter conditions. Structures installed in these conditions can be subject to cyclical loads from dynamic or mobile load impacts. In this context, the right structural steel must be determined in the design phase to ensure the structure’s integrity. By choosing the right type and grade of steel, structural elements will be protected against the brittle fracture that can occur in winter. This blog post clarifies the reasons for choosing WT steel and examines the phenomenon of brittle fracture by steel. In a northern environment—apart from ductility, a basic mechanical property that enables steel to undergo significant deformation before rupturing—impact strength at low temperatures is a critical property. The steel must be resilient to brittle failure. WT steel is steel with improved toughness. This type of steel must meet specific testing requirements, based on the daily mean minimum temperature in the location where it is to be used.WT steel: When should you use it?
-
Monika Rybarova, P.Eng., M.A.Sc., P.M.P.
Principal Engineer, Structural
-
-
08 abr 2019Energía Eléctrica y RenovablesOptimize conception with constructability
-
Vincent Hudon, P.Eng.
Department Manager, Construction
-
-
02 abr 2019Energía Eléctrica y RenovablesOperational readiness and commissioning plans: the key to a successful start
-
Sylvain Boily, P. Eng., MBA, P.M.P.
Commissioning Manager, Operational Readiness and Commissioning
-
-
25 mar 2019Energía Eléctrica y RenovablesThe importance of having a strategy to manage production data
-
Jean-François Beaulieu
Director, Digital Consultant
-
-
14 mar 2019Energía Eléctrica y RenovablesMeeting environmental compliance and gaining social licensing
-
Vincent Clément, P.Biol., RP.Bio., QAES
Profesional Senior de Medio Ambiente
-
-
07 mar 2019Energía Eléctrica y RenovablesOptimize production ramp-up through operational readiness
-
Nicolas Beauchamp, P.Eng.
Commissioning Manager, Operational Readiness and Commissioning
-
-
28 feb 2019Energía Eléctrica y RenovablesBusiness analysis: an essential tool for successfully implementing your IT projects
-
Julie Lessard
Senior Business Analyst, Operational Technology and Infrastructure
-
-
25 feb 2019Energía Eléctrica y RenovablesStrategic asset management planning (SAMP) in major industrial electrical networks
-
Pierre Girard, P.Eng.
National Practice Leader, Electrical
-
-
22 feb 2019Energía y químicosThe application of numerical modelling in efficiency-driven designs: ventilation problem
-
Lyne Ricard, P.Eng.
Senior Consulting Expert, Advanced Fuels and Chemicals
-
-
21 feb 2019Energía Eléctrica y RenovablesOptimizing the design of penstock manifold with 3D computational fluid dynamics (CFD) simulation
-
21 feb 2019Minería y metalurgiaThe frenetic pace of exploration programs and the tight deadlines between taking measurements and sending data to resource geologists can cause multiple database errors, which result in loss of time and money, and sometimes schedule delays. Most of these errors could have been easily identified and corrected as soon as the project started. Moreover, drilling data is essential for creating a robust geological model and for providing an unbiased estimate of mineral resources. This data must therefore be sufficiently rigorous, reliable and complete to comply with the NI 43-101 standard. Here are some examples of a few easily achievable steps to help you validate your data.How to get rid of errors in your drilling database in 25 questions
