-
Benoit Desjardins, P.Eng.
Senior Engineer, Operational Readiness and Commissioning
Publicaciones
-
07 oct 2025Minería y metalurgiaPowder engineering as a strategic lever in mineral processing
-
14 sept 2021Energía eléctrica y renovablesSuccessfully manage your project using solid communication with stakeholders
-
Marie Chiasson, P.Eng.
Practice Leader, Engineering Management
-
-
14 sept 2021Energía eléctrica y renovablesDo you have an incident response plan for your industrial control systems?
-
Pierre Janse Van Rensburg, GCIH
Senior Consulting Expert, ICS Cybersecurity
-
-
11 ago 2021Energía eléctrica y renovablesProject compliance with environmental laws: Why is the initial approach important?
-
11 ago 2021Energía eléctrica y renovablesReuse, refurbish or replace? How to select the right option for your plant expansion
-
Catherine Pelletier, ing.
Ingeniera Senior en Minas
-
-
10 ago 2021Energía eléctrica y renovablesHow to avoid production losses in the event of voltage sags on a distribution system -
-
05 ago 2021Energía eléctrica y renovablesIndustry 4.0: augment your reality, regardless the size of your plant!
-
Alexis Lallemand Desmarais
Programmer Analyst, Process Control and Operational Technology
-
-
05 ago 2021Energía eléctrica y renovablesIndustry 4.0: the design you expect, thanks to virtual reality
-
Alexis Lallemand Desmarais
Programmer Analyst, Process Control and Operational Technology
-
-
22 jun 2021Minería y metalurgiaOptimize alarm system performance
-
Marc Tardif, Technologist.
Senior Advisor, Operations - Salt Lake City office
-
-
21 jun 2021Energía eléctrica y renovablesCloud computing for industrial performance
-
-
27 may 2021Energía eléctrica y renovablesEarth observation is performed using images captured by satellites that are equipped with optical or radar sensors and serves a variety of purposes. In the last decade, there has been a significant increase in the number of satellites that monitor the Earth’s surface. Today, nearly 2,600 satellites are orbiting the Earth, of which more than 400 are capturing images of the Earth’s surface. An astronomical quantity of data is produced daily, because many of them have a high number of sensors and a short revisit frequency. This massive data availability makes it possible to carry out studies on the temporal evolution of land use and coverage. The massive quantity of satellite images, however, makes analysis by photo interpretation very laborious, if not impossible. Various techniques have been developed in recent years to try to automate these analysis tasks. One of the leading techniques relies on artificial intelligence (AI).Earth observation boosted by artificial intelligence -
26 may 2021Energía eléctrica y renovablesPower system voltage levels: making the right choices
-
Stéphan Landry, P.Eng.
Principal Engineer, Electrical - Power Generation and Apparatus
-
-
24 may 2021Minería y metalurgiaUnderground shaft excavation using the inverse (drop) raise method
-
Félix Roy-Demers P.Eng.
Engineer
-
-
28 abr 2021Energía eléctrica y renovablesThe future of electrifying mines in B.C.
-
Amanda Fitch, P.Eng.
Regional Director, Mining and Metals Market, Western Canada
-
-
21 abr 2021Minería y metalurgiaMetallurgical lab designed to meet your needs
-
20 abr 2021Energía eléctrica y renovablesIn an increasingly connected world, managing massive amounts of data, or big data, is a major driving force of the economy. Today, it is easier to access thanks to several technologies that have made it possible to extract, organize and centralize the data to make it quickly accessible throughout the organization. For most businesses, the real challenge today is to clearly outline the actions that need to be taken based on the collected data and making the right decisions as a result.Data science serving business -
-
13 abr 2021Minería y metalurgiaFire and gas detection: avoid the traps!
-
Sébastien Grégoire, P.Eng.
Senior Engineer, Automation
-
-
06 abr 2021Energía eléctrica y renovablesFluid-filled transformer refurbishment: points to monitor
-
30 mar 2021Minería y metalurgiaRehabilitating an iron pellet indurating furnace
-
Eric Moisan, P.Eng., M.A.Sc.
Department Manager, Industrial and Hydro
-
-
23 mar 2021Minería y metalurgiaHow to reduce plant noise levels
-
Nicholas Allen, P.Eng.
Engineer - Energy and Air Quality
-
-
22 mar 2021Minería y metalurgiaIn a previous blog article, we discussed the mining dam safety review. This article focuses on assessing and categorizing the risks of dam failure. Remember that mining dams are classified according to their potential consequences of failure, whether downstream or upstream of the structure. The term “consequences” refers to the damage above and beyond that which would have occurred in the same event or conditions had the dam not failed. The consequence of failure of a mining dam that contains liquefiable solids can be greater than those for the same dam containing only water. Although tailings and liquefiable solids may travel a shorter distance than water, the material can act as a viscous fluid with a high specific gravity that can cause more physical and environmental damage than water alone. Removal of released solids and clean-up could be costly, impractical and impossible in some cases, for example in densely forested areas or water bodies.Risks associated with mining dam failure -
16 mar 2021Minería y metalurgiaManaging your investment plan wisely
-
Claude Catudal
Senior Consulting Expert, Project Management and Control
-
-
03 mar 2021Energía eléctrica y renovablesIndustrial control system (ICS) cybersecurity risk methodology webinar
-
José Alvarado, P.Eng., GICSP
Director, ICS Cybersecurity
-
-
02 mar 2021Minería y metalurgiaMining dam safety review
-
22 feb 2021Energía eléctrica y renovablesA piecemeal 4.0 approach? Really?
-
Jean-François Beaulieu
Director, Digital Consultant
-
-
09 feb 2021Minería y metalurgiaMining and metals companies frequently rely on silos and bins for storage or feeding their process. Flow issues that can impede production include silo and chute blockages, material segregation or inconsistent throughput.Flow issues in silos and bins -
-
08 feb 2021Energía eléctrica y renovablesA procedural overview of urban or sensitive-area blasting practices
-
Riccardo Del Bosco, ing.
Ingeniero Senior en Minas y Geología
-
-
01 feb 2021Energía eléctrica y renovablesExcitation system upgrades: make the right choice!
-
Léo Roy, P.Eng.
Senior Engineer, Electrical
-
-
25 ene 2021Energía eléctrica y renovablesDesign and commissioning of a massive IEC61850 multivendor substation automation project: a twisted path
-
-
22 ene 2021Otras IndustriasMigrating a distributed control system (DCS)
-
14 ene 2021Energía eléctrica y renovablesDams serve various retention purposes including flood control, water storage for power generation and containment of tailings at mines. Eventually, dams will need to be decommissioned, usually because they have outlived their usefulness or are in a state of disrepair. The owner will need to ensure that the relevant environmental regulatory requirements are met and that the decommissioning is completed with minimal harm to the environment. Depending on the location of the dam, any proposed decommissioning may pose a range of challenges, with environmental issues that warrant consideration. In this first of a series of related blog articles, we will consider one of the main environmental issues; sediment management.Environmental considerations for dam decommissioning – Part 1: Sediment management